How to Install a Wall Mount Faucet: The Ultimate Guide

Installing a wall-mounted faucet is not as complicated as you might imagine. The following guide will show you how to install your own if it’s in the budget.

Many homes these days have the option of installing a bathroom faucet on the wall instead of on the tub or sink. This is actually quite common and can be done with very little effort.

The process of installing a faucet is simple, but there are some things you should know before you go ahead and buy one.

What is a Wall Mounted Faucet?

A wall-mounted faucet is a type of bathroom fixture that can be installed on the wall of your bathroom in place of a standard vanity sink. Usually, this type of faucet features a decorative metal or ceramic body and is mounted to the wall by attaching it to metal screws.

When shopping for a new faucet, you’ll want to make sure that it has a built-in spout and aerator. The spout will be connected directly to the body of the faucet and will drop down into the sink drain for water flow. The aerator on the other hand will sit on top of the spout and help prevent clogs from forming.

The Benefits of Wall Mounted Faucets

There are many benefits to installing a wall mounted faucet. For starters, the cost of installation is not as high as it would be with a floor mount, so this will actually save you money in the long run. Additionally, there are no exposed pipes or valves to worry about, and you don’t have to cut into your walls or floors. This means that you won’t need to spend money on hiring a professional plumber and can save even more money in the long run. Another benefit is that because they are installed on the wall instead of on the tub or sink, they do not take up any space in the bathroom and can look sleek and modern.

This type of faucet makes much more sense for people who want a minimalist bathroom design with an industrial vibe. They also offer a bigger range of choices when it comes to different types of finishes and materials than a traditional bathtub faucet does. You can find one that complements your decorating style rather easily.

Things You Need

  1. Locking pliers
  2. Screwdriver
  3. 2x4 lumber
  4. 2 1/2-inch wood screws
  5. 1/2-inch copper or PEX water pipe
  6. Two shutoff valves
  7. Two 1/2-inch threaded elbows
  8. 1 1/4-inch screws
  9. 1/2-inch brass pipe nipples
  10. Duct tape
  11. Soldering supplies
  12. Level

The Installation Process

Wall mount faucet | Installation process
  1. The first step is to find the right location for your new faucet. The faucet should be installed in an area where there is good drainage. If the sink or tub itself is exposed, you’ll want to make sure that it’s sturdy enough to support the weight of a faucet and its attachments.
  2. Next, you’ll need to measure out the area for your new faucet. Some wall-mounted faucets come with pre-drilled holes, so you can start from there or just use a level and mark off your measurements on the wall.
  3. Once you have these measurements, you will need to find an appropriate screwdriver that will match the size of your screws so that they are tight and secure when you install them into the wall.
  4. After this process has been completed, you can begin attaching your new faucet to the wall by screwing it in at various points around it. The bottom of the unit needs to be secured before going up, as well as any other areas around where water may flow out after being turned on like under sinks or at the top of bathtubs. You will then need to connect any required hoses and chemicals needed for running water through it using pipe fittings and putty tape before turning on your water supply.
  5. Once you’re done with that, you can finally install your faucet and enjoy the benefits of a new wall-mounted faucet.
  6. Once you have the faucet attached to your wall, you will then need to attach the handle or pull-out spout to the unit. It is imperative that you attach this part properly so that it will not become loose during use and come off while in use. Simply follow the instructions provided with your faucet, as they will vary slightly.

Some wall-mounted faucets may require a few different types of installation materials depending on how they are constructed, such as adhesive-backed foam tape for securing the plumbing fittings or drywall screws for securing them into a stud when needed. Regardless of what materials you need to use, every project requires a basic knowledge of how to install them onto walls.

Tips for Installing a Wall Mounted Faucet

If you want to install a faucet, follow these tips for the best experience:

1. Measure the distance from the wall to the waterline of your sink or tub and select an appropriate size faucet.

2. If you are looking for a high-pressure faucet, make sure that your home’s water pressure is sufficient for it. A minimum of 60 psi is recommended for most faucets.

3. Consider installing a low-flow aerator if your home has hard water and you want to reduce the amount of time on your hands while waiting before your shower or bathtub fills up with water.

4. Make sure that you have enough clearance above and below the sink/tub as well as side-to-side so that you can fit all components comfortably into place without any issues at installation or during use.

5. Consider purchasing an adapter kit to ensure compatibility with other plumbing components in case you need them in future installations or renovations.

Understanding the Parts of a Wall Mounted Faucet

First, you should understand the different parts of a wall-mounted faucet.

There are three main pieces that make up the whole: the spout, the top plate, and the base plate. They each have special functions in order to make your bathroom faucet work properly.

The spout is the part of your faucet that actually dispenses water or any liquid you put into it. The top plate is where your aerator will be attached – this piece helps to regulate how much water comes out of your faucet at one time. And finally, the base plate is where your sink will attach to – it’s necessary for your sink to be able to sit properly on top of it.

How to install faucet in your home.

First, you need to drill a hole in the wall to secure your faucet. The holes for this will vary depending on the size of your faucet and where it will be installed.

Next, you will need to find a mounting plate that matches the size of your faucet. This is generally found with your hardware store or home improvement store. If you can’t find one, you’ll need to get creative with some hardware or use scrap lumber and old fence boards.

Last, of all, mount the faucet on the mounting plate and connect it to the water supply line. You can make sure that everything is tight by applying the plumber’s putty on all sides of the faucet and mounting plate before connecting them together. Hopefully, your new installation will be complete!


There are many different types of faucets and choosing the right one for your needs can seem like a daunting task. However, with a little research and some careful consideration, you can find the perfect faucet for your needs. The best way to get started is to begin by looking at the different styles and then deciding on one that fits both your budget and style. Once you’ve decided on your ideal model, simply take it home from your local store so that you can start installing it in your bathroom.

Are wall mounted faucets more expensive to install?

Not necessarily. It all depends on what type of faucet you choose and the location of your bathroom. Wall mounted faucets can be installed just like any other faucet, but they are usually more expensive than standard ones because they are made out of metal and come in a variety of designs.

Can any faucet be wall mounted?

Yes, any faucet can be wall mounted. However, if you choose to install a wall mounted faucet, it will be important to choose one that has the proper mounting holes for the wall mount.

Do wall mount faucets have shut-off valves?

Yes, wall mounted faucets have shut off valves. However, like any other faucet, you will need to make sure that the valve is turned on.

How do I know what size hole I need?

When it comes to wall mounted faucets, you should measure the distance from where your sink will be mounted to the floor or wall (see image below). If you would like to know if this faucet will fit in your space, you should measure the distance from where the mounting holes are on the faucet to the wall or floor.

Are wall mount faucets a good idea?

Yes, if you have a small space, or if you don’t have room for a sink at all and the wall mount faucet is small enough for your space, then this would be a good solution.