How To Clean A Pull Down Kitchen Faucet Spray Head – The Simple Way.

Your kitchen is a place where you cook, eat and relax. But if it’s not kept clean, it can quickly become a mess. That’s why it’s important to keep your spray heads clean. Here are some simple steps to cleaning a pulldown kitchen faucet spray head:

The majority of us have a kitchen faucet on the wall in our homes. The faucet is connected to a drain, which is attached to the sink. The sink itself is connected to a drainpipe, which connects the sink and your home’s plumbing system. When you want to clean your kitchen faucet sprayer, there are several ways that you can do it. We will show you how to clean your sprayer with soap and water, with vinegar and baking soda, with vinegar alone, and with water alone!

Easy Steps to Clean the Pull Down Faucet Spray Head

  • Step 1 – Turn off your faucet at the main valve under the sink.
  • Step 2 – Turn off the water at your main shut-off valve and let the pipes drain. Let them drain for at least an hour.
  • Step 3 – Run hot water through your faucet to clean out any debris that may have accumulated in the sprayer. Use a rag to wipe down all of the parts and sprayer head. You may have to run a bit of hot water through it, just try not to overdo it or burn yourself!
  • Step 4 – Remove the old spray head if it is still attached to your faucet. If you need instructions on how to remove it, check out this article on removing a spray head.
  • Step 5 – Spray the faucet sprayer with a vinegar and baking soda mixture. This will kill any bacteria or mold that may be lurking in the sprayer. The amount of vinegar and baking soda will depend on how dirty your faucet sprayer is, but start with 1/2 cup of vinegar and 1/4 cup of baking soda, then add more if you need to. If you’re using a spray bottle, use about 2 ounces of each.
  • Step 6 – Rinse out your faucet sprayer with hot water to remove all of the vinegar mixture.
  • Step 7 – Wipe down your faucet sprayer with a rag and clean it with hot water and dish soap. If you haven’t already, dry your sprayer head off with a towel or paper towel. When it’s dry, spray the faucet sprayer with a vinegar and baking soda mixture again.
  • Step 8 – Use a rag to wipe down all of the parts of your faucet sprayer. You may have to run a bit of hot water through it, just try not to overdo it or burn yourself!
  • Step 9 – Reattach your faucet sprayer to your faucet.
  • Step 10 – Turn the water back on, but don’t use it yet. You want to allow the faucet sprayer to fully dry before you start using it. If you don’t, you might get water in your hose.
  • Step 11 – Using a rag and hot water, wipe off the outside of your faucet sprayer. Don’t worry about getting any vinegar inside of it, as long as the vinegar stays where it’s supposed to be, there shouldn’t be any problems!
  • Step 12 – Run a bit of hot water through your faucet sprayer again to make sure that everything is still working properly. If not, then do Step 13.
  • Step 13 – If you still have any vinegar inside of your faucet sprayer, or if your faucet sprayer needs to be replaced, then you can go ahead and replace it. If not, then skip to Step 14.
  • Step 14 – Take apart the faucet sprayer by unscrewing the bottom piece from the top part. You’ll need to use a screwdriver or a knife to do this step.
  • Step 15 – Clean out any dried vinegar that may be inside of the sprayer with a rag and hot water. You may want to remove all of the pieces from the sprayer, but this isn’t necessary at all. All that’s needed is some hot water and a rag.
  • Step 16 – Reassemble the faucet sprayer by cleaning off any excess vinegar with a rag and hot water. Again, you don’t need to remove any of the pieces from the sprayer. You can put them back together as they were, or put them in another container if you want to clean it out again later.

How Do You Remove the Aerator from a Pull Down Faucet?

The aerator is a small piece of metal that is used to keep water moving from the faucet. It can get stuck on the bottom of the faucet and prevent you from using it. If this is your situation, you can remove the aerator by using a plunger or a vacuum cleaner.

If you have a Pull Down Faucet, you know how frustrating it is to have to fight with the aerator every time you use it. The aerator can get stuck on the bottom of the faucet and prevent you from using it. If this is your situation, read on for a quick and easy way to remove the aerator from your Pull Down Faucet!

  1. If your Pull Down Faucet is a two-handle faucet, turn the cold water on and wait for it to run.
  2. Faucet handles and aerator blades are often stuck on the bottom of faucets, so using a plunger or vacuum cleaner is the best way to remove them.
  3. Turn off the water and remove the aerator from the faucet by pulling it up with pliers or a pair of adjustable pliers.
  4. Place a towel over the top of the faucet so that you don’t get water all over it as you replace it.
  5. Reinstall your new aerator by aligning it with one of its notches on the spring clip and pushing down gently until it clicks into place.
  6. Turn the water back on and test it for leaks by turning the cold faucet on and off several times. If you don’t see any water leaking from around the aerator, then you should be good to go!
  7. Congratulations! Now you can get back to enjoying your new faucet.

How Do You Remove a Faucet Aerator Without Removing it?

  1. Use a plunger to push the aerator from the bottom of the faucet.
  2. Clean out any debris that may be blocking the aerator.
  3. Use a vacuum cleaner to remove any remaining debris from the inside of the faucet.
  4. Put back on your faucet and enjoy!


It’s easy to clean a spray head – just follow these simple steps. By following these instructions, you can prevent water build-up, improve performance and keep your spray head in top condition.